- Postcode districts
- FY5, FY7
- Nearby
- Thornton-Cleveleys, Poulton-le-Fylde and Blackpool
- Guide price
- £400–£3,300
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Lancashire
- Survey
- Free, at your home
What does a new shower cost in Fleetwood?
As a guide, budget £400 to £3,300 including VAT for a new shower in Fleetwood; your written quote will pin it down. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Fleetwood including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Fleetwood
We work right across Fleetwood — FY5 and FY7 — and in neighbouring Thornton-Cleveleys and Poulton-le-Fylde.
Homes in and around Fleetwood vary, so we look at the floor, the walls and the water system before we price anything. If your Fleetwood bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If you are replacing a failed electric shower in Fleetwood, we check whether the existing cable and circuit suit the new unit.
Supplies across most of Lancashire are soft. If that holds for your street in Fleetwood, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Electrical connection by a qualified electrician, tested and certified
- A bath screen, tray or enclosure where the shower is new
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
Decisions to make first
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
