- Postcode districts
- L39, WN8
- Nearby
- Maghull, Skelmersdale and Kirkby
- Guide price
- £400–£3,300
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Lancashire
- Survey
- Free, at your home
What does a new shower cost in Ormskirk?
For Ormskirk, our guide range for a new shower is £400 to £3,300 including VAT. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Ormskirk including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Ormskirk
In Ormskirk we cover L39 and WN8; we also cover Maghull, 4.3 miles away, and Skelmersdale.
Being a smaller town does not change how we work in Ormskirk: free survey, written quote, one team. We test pressure and flow at Ormskirk surveys before recommending a shower, so you know how it will perform before you buy. If you are replacing a failed electric shower in Ormskirk, we check whether the existing cable and circuit suit the new unit.
Water across much of Lancashire is soft. If that holds for your street in Ormskirk, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
