Shower installation in Formby

Postcode districts: L37, L38
Nearby: Maghull, Southport and Bootle
Guide price: £400–£3,300
Typical time on site: half a day to 3 days
Water: Soft across most of Merseyside
Survey: Free, at your home

What does a new shower cost in Formby?

Our guide price for a new shower in Formby is £400–£3,300 including VAT. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£950

Existing supply and position

Typical

New shower over bath

£750–£1,700

Tiling the bath surround

New shower with enclosure

£1,400–£3,300

Tray, enclosure and valve

Guide prices for Formby including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Formby

As well as Formby itself (L37 and L38), we survey in Maghull, Southport and Bootle.

Formby gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If you are replacing a failed electric shower in Formby, we check whether the existing cable and circuit suit the new unit. If you want a shower in your Formby home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.

Water across much of Merseyside is soft. If that holds for your street in Formby, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A check of your hot-water system, water pressure and flow rate
A bath screen, tray or enclosure where the shower is new
New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Electrical connection by a qualified electrician, tested and certified

Decisions to make first

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Formby: questions

What is the price of a new shower in Formby?

A new shower in Formby usually costs £400–£3,300 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Who handles building control for a new shower in Formby?

Building control for Formby is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Formby.

Is the home survey in Formby really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Can I fit a shower pump with a combi boiler?

No. A combi boiler takes its water from the mains, and connecting a pump directly to the mains supply is not allowed under the water fittings regulations. Shower pumps are only for gravity systems with a cold tank. If a combi shower is weak, the cause is usually the incoming flow, the boiler output or the head, not something a pump can fix.