Shower installation in Litherland

Postcode districts: L20, L21, L22
Nearby: Bootle, Maghull and Liverpool
Guide price: £400–£3,300
Typical time on site: half a day to 3 days
Water: Soft across most of Merseyside
Survey: Free, at your home

What does a new shower cost in Litherland?

Our guide price for a new shower in Litherland is £400–£3,300 including VAT. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£950

Existing supply and position

Typical

New shower over bath

£750–£1,700

Tiling the bath surround

New shower with enclosure

£1,400–£3,300

Tray, enclosure and valve

Guide prices for Litherland including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Litherland

In Litherland we cover L20, L21 and L22; we also cover Bootle, 0.8 miles away, and Maghull.

Being a smaller town does not change how we work in Litherland: free survey, written quote, one team. If you are replacing a failed electric shower in Litherland, we check whether the existing cable and circuit suit the new unit. For Litherland homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.

Supplies across most of Merseyside are soft. If that holds for your street in Litherland, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
Electrical connection by a qualified electrician, tested and certified
A bath screen, tray or enclosure where the shower is new

Decisions to make first

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Litherland: questions

How much should I budget for a new shower in Litherland?

A new shower in Litherland usually costs £400–£3,300 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover L20 in Litherland?

Yes. We cover all of Litherland, including L20, L21 and L22, and nearby Bootle, Maghull and Liverpool. Survey visits are free and arranged at a time that suits you.

Is the water hard in Litherland?

Who handles building control for a new shower in Litherland?

Building control for Litherland is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Why does my shower keep going hot and cold?

Usually because it is a manual mixer without thermostatic control, so when someone runs a tap or flushes a toilet, the balance of hot and cold changes. A thermostatic valve corrects for this automatically. On an electric shower, scale build-up or a failing part can cause the same symptom.