- Postcode districts
- PE9
- Nearby
- Oakham, Peterborough and Corby
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Lincolnshire
- Survey
- Free, at your home
What does a new shower cost in Stamford?
In Stamford, a new shower typically costs £450–£3,400 including VAT, based on East Midlands prices. Prices in East Midlands run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Stamford including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Stamford
We cover every part of Stamford, including PE9, and nearby Oakham (10.5 miles) and Peterborough (11.2 miles).
Being a smaller town does not change how we work in Stamford: free survey, written quote, one team. If you are replacing a failed electric shower in Stamford, we check whether the existing cable and circuit suit the new unit. If your Stamford bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two.
Supplies across most of Lincolnshire are hard. If your supply in Stamford is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Decisions to make first
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
