Shower installation in Bathgate

Postcode districts: EH48
Nearby: Livingston, Broxburn and Grangemouth
Guide price: £450–£3,400
Typical time on site: half a day to 3 days
Water: Soft across most of the Lothians
Survey: Free, at your home

What does a new shower cost in Bathgate?

For Bathgate, our guide range for a new shower is £450 to £3,400 including VAT. Labour costs in Scotland put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£450–£950

Test and handover

Typical

New shower over bath

£750–£1,750

Thermostatic bar shower and riser

New shower with enclosure

£1,450–£3,400

Pipework and waste

Guide prices for Bathgate including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Bathgate

In Bathgate we cover EH48; we also cover Livingston, 4.7 miles away, and Broxburn.

Bathgate gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Bathgate bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If you want a shower in your Bathgate home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.

Most of the Lothians is supplied with soft water. If that holds for your street in Bathgate, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
A check of your hot-water system, water pressure and flow rate
Removal of the old shower, a full-flow test and a handover on isolating and descaling it

Decisions to make first

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Rules that apply in Scotland

In Scotland there is no Part P, but a new shower circuit must still be designed, installed and certified to BS 7671. Water fittings, including pumps and backflow protection, are covered by the Scottish Water Byelaws 2014.

More about shower installation

Shower installation in Bathgate: questions

What is the price of a new shower in Bathgate?

A new shower in Bathgate usually costs £450–£3,400 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the water hard in Bathgate?

Will a new shower in Bathgate need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Bathgate.

Can I fit a shower pump with a combi boiler?

No. A combi boiler takes its water from the mains, and connecting a pump directly to the mains supply is not allowed under the water fittings regulations. Shower pumps are only for gravity systems with a cold tank. If a combi shower is weak, the cause is usually the incoming flow, the boiler output or the head, not something a pump can fix.