Shower installation in Bridgend

Postcode districts: CF31, CF35
Nearby: Porthcawl, Llantwit Major and Maesteg
Guide price: £400–£3,300
Typical time on site: half a day to 3 days
Water: Soft across most of Mid Glamorgan
Survey: Free, at your home

What does a new shower cost in Bridgend?

Guide price in Bridgend: £400–£3,300 including VAT, depending on the room and what you choose. We adjust the national guide for Wales, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£950

Existing supply and position

Typical

New shower over bath

£750–£1,650

Tiling the bath surround

New shower with enclosure

£1,400–£3,300

Tray, enclosure and valve

Guide prices for Bridgend including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Bridgend

As well as Bridgend itself (CF31 and CF35), we survey in Porthcawl, Llantwit Major and Maesteg.

In Bridgend, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. For Bridgend homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. We test pressure and flow at Bridgend surveys before recommending a shower, so you know how it will perform before you buy.

Supplies across most of Mid Glamorgan are soft. If that holds for your street in Bridgend, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A bath screen, tray or enclosure where the shower is new
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
Electrical connection by a qualified electrician, tested and certified
New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank

Decisions to make first

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Digital shower

A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.

Rules that apply in Wales

In Wales, a new circuit for an electric shower is notifiable under the Welsh Part P, which covers more work than the English version. An unvented cylinder must be fitted by a G3-qualified installer.

More about shower installation

Shower installation in Bridgend: questions

How much does a new shower cost in Bridgend?

A new shower in Bridgend usually costs £400–£3,300 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Is the water hard in Bridgend?

Who handles building control for a new shower in Bridgend?

Building control for Bridgend is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Bridgend.

Can I fit a shower pump with a combi boiler?

No. A combi boiler takes its water from the mains, and connecting a pump directly to the mains supply is not allowed under the water fittings regulations. Shower pumps are only for gravity systems with a cold tank. If a combi shower is weak, the cause is usually the incoming flow, the boiler output or the head, not something a pump can fix.