Shower installation in Porthcawl

Postcode districts: CF36
Nearby: Bridgend, Maesteg and Llantwit Major
Guide price: £400–£3,300
Typical time on site: half a day to 3 days
Water: Soft across most of Mid Glamorgan
Survey: Free, at your home

What does a new shower cost in Porthcawl?

Guide price in Porthcawl: £400–£3,300 including VAT, depending on the room and what you choose. Prices in Wales run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£950

Existing supply and position

Typical

New shower over bath

£750–£1,650

Tiling the bath surround

New shower with enclosure

£1,400–£3,300

Tray, enclosure and valve

Guide prices for Porthcawl including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Porthcawl

In Porthcawl we cover CF36; we also cover Bridgend, 5.7 miles away, and Maesteg.

Being a smaller town does not change how we work in Porthcawl: free survey, written quote, one team. If your Porthcawl bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If the shower in your Porthcawl home swings between hot and cold, a thermostatic valve is usually the fix.

Supplies across most of Mid Glamorgan are soft. If that holds for your street in Porthcawl, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
A check of your hot-water system, water pressure and flow rate
A bath screen, tray or enclosure where the shower is new
Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area

Decisions to make first

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Rules that apply in Wales

In Wales, a new circuit for an electric shower is notifiable under the Welsh Part P, which covers more work than the English version. An unvented cylinder must be fitted by a G3-qualified installer.

More about shower installation

Shower installation in Porthcawl: questions

How much should I budget for a new shower in Porthcawl?

A new shower in Porthcawl usually costs £400–£3,300 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the water hard in Porthcawl?

Who handles building control for a new shower in Porthcawl?

Building control for Porthcawl is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Porthcawl.

Does an electric shower need its own circuit?

Almost always. An electric shower draws a large current, so it needs a dedicated circuit from the consumer unit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, with RCD protection. In England and Wales a new circuit is notifiable work. Swapping like for like onto an adequate existing circuit is simpler.