- Postcode districts
- BS21
- Nearby
- Nailsea, Portishead and Weston-super-Mare
- Guide price
- £450–£3,600
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Somerset
- Survey
- Free, at your home
What does a new shower cost in Clevedon?
Our guide price for a new shower in Clevedon is £450–£3,600 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Clevedon including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Clevedon
We work right across Clevedon — BS21 — and in neighbouring Nailsea and Portishead.
Clevedon gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If you are replacing a failed electric shower in Clevedon, we check whether the existing cable and circuit suit the new unit. If the shower in your Clevedon home swings between hot and cold, a thermostatic valve is usually the fix.
Water across much of Somerset is hard. If your supply in Clevedon is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
Decisions to make first
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
