- Postcode districts
- DN12
- Nearby
- Mexborough, Maltby and Rawmarsh
- Guide price
- £400–£3,300
- Typical time on site
- half a day to 3 days
- Water
- Moderately hard across most of South Yorkshire
- Survey
- Free, at your home
What does a new shower cost in Conisbrough?
Guide price in Conisbrough: £400–£3,300 including VAT, depending on the room and what you choose. We adjust the national guide for Yorkshire and the Humber, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Conisbrough including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Conisbrough
We work right across Conisbrough — DN12 — and in neighbouring Mexborough and Maltby.
Conisbrough gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Conisbrough bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If you want a shower in your Conisbrough home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.
Water across much of South Yorkshire is moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Conisbrough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- A bath screen, tray or enclosure where the shower is new
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Electrical connection by a qualified electrician, tested and certified
Decisions to make first
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
