Shower installation in Maltby

Postcode districts: S25, S66
Nearby: Dinnington, Conisbrough and Rotherham
Guide price: £400–£3,300
Typical time on site: half a day to 3 days
Water: Moderately hard across most of South Yorkshire
Survey: Free, at your home

What does a new shower cost in Maltby?

Guide price in Maltby: £400–£3,300 including VAT, depending on the room and what you choose. Prices in Yorkshire and the Humber run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£950

Test and handover

Typical

New shower over bath

£750–£1,650

Thermostatic bar shower and riser

New shower with enclosure

£1,400–£3,300

Pipework and waste

Guide prices for Maltby including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Maltby

As well as Maltby itself (S25 and S66), we survey in Dinnington, Conisbrough and Rotherham.

Maltby gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Maltby bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. For Maltby homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.

Water across much of South Yorkshire is moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Maltby. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Removal of the old shower, a full-flow test and a handover on isolating and descaling it
Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
A check of your hot-water system, water pressure and flow rate

Decisions to make first

Digital shower

A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.

Exposed or concealed

An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Maltby: questions

How much should I budget for a new shower in Maltby?

A new shower in Maltby usually costs £400–£3,300 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover S25 and S66 in Maltby?

Yes. We cover all of Maltby, including S25 and S66, and nearby Dinnington, Conisbrough and Rotherham. Survey visits are free and arranged at a time that suits you.

Is the water hard in Maltby?

Who handles building control for a new shower in Maltby?

Building control for Maltby is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can you replace an electric shower with a mixer?

Yes, if your hot-water system can supply it. That means running hot and cold pipes to the shower position and making the old shower circuit safe or reusing it. It is worth doing if you have a combi or unvented cylinder with good flow.