Shower installation in Ashford, Surrey

Postcode districts: TW15, TW16, TW18
Nearby: Staines, Feltham and Sunbury-on-Thames
Guide price: £500–£3,900
Typical time on site: half a day to 3 days
Water: Hard across most of Surrey
Survey: Free, at your home

What does a new shower cost in Ashford?

Our guide price for a new shower in Ashford is £500–£3,900 including VAT. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£500–£1,100

Test and handover

Typical

New shower over bath

£900–£2,000

Thermostatic bar shower and riser

New shower with enclosure

£1,700–£3,900

Pipework and waste

Guide prices for Ashford including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Ashford

As well as Ashford itself (TW15, TW16 and TW18), we survey in Staines, Feltham and Sunbury-on-Thames.

In Ashford, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If you are replacing a failed electric shower in Ashford, we check whether the existing cable and circuit suit the new unit. If you want a shower in your Ashford home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.

Water across much of Surrey is hard. If your supply in Ashford is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A check of your hot-water system, water pressure and flow rate
Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head

Decisions to make first

Digital shower

A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.

Head and handset

A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Ashford: questions

How much should I budget for a new shower in Ashford?

A new shower in Ashford usually costs £500–£3,900 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the home survey in Ashford really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover TW15 in Ashford?

Yes. We cover all of Ashford, including TW15, TW16 and TW18, and nearby Staines, Feltham and Sunbury-on-Thames. Survey visits are free and arranged at a time that suits you.

Is the water hard in Ashford?

Does an electric shower need its own circuit?

Almost always. An electric shower draws a large current, so it needs a dedicated circuit from the consumer unit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, with RCD protection. In England and Wales a new circuit is notifiable work. Swapping like for like onto an adequate existing circuit is simpler.