- Postcode districts
- KT21, KT22
- Nearby
- Epsom, Cobham and Dorking
- Guide price
- £500–£3,900
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Surrey
- Survey
- Free, at your home
What does a new shower cost in Leatherhead?
Guide price in Leatherhead: £500–£3,900 including VAT, depending on the room and what you choose. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Leatherhead including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Leatherhead
We work right across Leatherhead — KT21 and KT22 — and in neighbouring Epsom and Cobham.
In Leatherhead, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If you are replacing a failed electric shower in Leatherhead, we check whether the existing cable and circuit suit the new unit. If the shower in your Leatherhead home swings between hot and cold, a thermostatic valve is usually the fix.
Supplies across most of Surrey are hard. If your supply in Leatherhead is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A bath screen, tray or enclosure where the shower is new
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
