- Postcode districts
- WS9
- Nearby
- Walsall, Bloxwich and Sutton Coldfield
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Varies across the West Midlands
- Survey
- Free, at your home
What does a new shower cost in Aldridge?
As a guide, budget £450 to £3,400 including VAT for a new shower in Aldridge; your written quote will pin it down. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Aldridge including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Aldridge
We work right across Aldridge — WS9 — and in neighbouring Walsall and Bloxwich.
In Aldridge, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Aldridge bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. We test pressure and flow at Aldridge surveys before recommending a shower, so you know how it will perform before you buy.
Supplies across the West Midlands range from soft to hard depending on the source. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Aldridge. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- Electrical connection by a qualified electrician, tested and certified
Decisions to make first
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

