- Postcode districts
- B90, B91, B92
- Nearby
- Shirley, Acocks Green and Washwood Heath
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Varies across the West Midlands
- Survey
- Free, at your home
What does a new shower cost in Solihull?
Our guide price for a new shower in Solihull is £450–£3,400 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Solihull including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Solihull
We work right across Solihull — B90, B91 and B92 — and in neighbouring Shirley and Acocks Green.
Solihull has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. If you want a shower in your Solihull home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit. If the shower in your Solihull home swings between hot and cold, a thermostatic valve is usually the fix.
Supplies across the West Midlands range from soft to hard depending on the source. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Solihull. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- Electrical connection by a qualified electrician, tested and certified
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
Decisions to make first
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

