- Postcode districts
- BN15
- Nearby
- Shoreham-by-Sea, Worthing and Portslade
- Guide price
- £500–£3,900
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of West Sussex
- Survey
- Free, at your home
What does a new shower cost in Lancing?
For Lancing, our guide range for a new shower is £500 to £3,900 including VAT. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Lancing including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Lancing
We cover every part of Lancing, including BN15, and nearby Shoreham-by-Sea (2.1 miles) and Worthing (2.4 miles).
Lancing gets the same process as anywhere else: a free survey at your home and a written, itemised quote. We test pressure and flow at Lancing surveys before recommending a shower, so you know how it will perform before you buy. For Lancing homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.
Most of West Sussex has hard water. If your supply in Lancing is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- A bath screen, tray or enclosure where the shower is new
- A check of your hot-water system, water pressure and flow rate
Decisions to make first
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

