Shower installation in Keighley

Postcode districts: BD21, BD22
Nearby: Bingley, Baildon and Shipley
Guide price: £400–£3,300
Typical time on site: half a day to 3 days
Water: Soft across most of West Yorkshire
Survey: Free, at your home

What does a new shower cost in Keighley?

Guide price in Keighley: £400–£3,300 including VAT, depending on the room and what you choose. Prices in Yorkshire and the Humber run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£950

Like-for-like mixer or electric shower

Typical

New shower over bath

£750–£1,650

Bath screen

New shower with enclosure

£1,400–£3,300

Tiling to the enclosure

Guide prices for Keighley including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Keighley

In Keighley we cover BD21 and BD22; we also cover Bingley, 3.1 miles away, and Baildon.

Homes in and around Keighley vary, so we look at the floor, the walls and the water system before we price anything. For Keighley homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. If you want a shower in your Keighley home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.

Water across much of West Yorkshire is soft. If that holds for your street in Keighley, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
A check of your hot-water system, water pressure and flow rate
A bath screen, tray or enclosure where the shower is new

Decisions to make first

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Keighley: questions

How much should I budget for a new shower in Keighley?

A new shower in Keighley usually costs £400–£3,300 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Is the water hard in Keighley?

Who handles building control for a new shower in Keighley?

Building control for Keighley is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Keighley.

Does an electric shower need its own circuit?

Almost always. An electric shower draws a large current, so it needs a dedicated circuit from the consumer unit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, with RCD protection. In England and Wales a new circuit is notifiable work. Swapping like for like onto an adequate existing circuit is simpler.