- Postcode districts
- LS19, LS20
- Nearby
- Yeadon, Baildon and Shipley
- Guide price
- £400–£3,300
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of West Yorkshire
- Survey
- Free, at your home
What does a new shower cost in Guiseley?
Our guide price for a new shower in Guiseley is £400–£3,300 including VAT. We adjust the national guide for Yorkshire and the Humber, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Guiseley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Guiseley
We work right across Guiseley — LS19 and LS20 — and in neighbouring Yeadon and Baildon.
Being a smaller town does not change how we work in Guiseley: free survey, written quote, one team. If you want a shower in your Guiseley home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit. For Guiseley homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.
Supplies across most of West Yorkshire are soft. If that holds for your street in Guiseley, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- A check of your hot-water system, water pressure and flow rate
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
