- Postcode districts
- LS18, LS19, LS20
- Nearby
- Guiseley, Horsforth and Shipley
- Guide price
- £400–£3,300
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of West Yorkshire
- Survey
- Free, at your home
What does a new shower cost in Yeadon?
As a guide, budget £400 to £3,300 including VAT for a new shower in Yeadon; your written quote will pin it down. Labour costs in Yorkshire and the Humber put local prices at about 7% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Yeadon including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Yeadon
We cover every part of Yeadon, including LS18, LS19 and LS20, and nearby Guiseley (1.3 miles) and Horsforth (2.5 miles).
Homes in and around Yeadon vary, so we look at the floor, the walls and the water system before we price anything. We test pressure and flow at Yeadon surveys before recommending a shower, so you know how it will perform before you buy. If you are replacing a failed electric shower in Yeadon, we check whether the existing cable and circuit suit the new unit.
Supplies across most of West Yorkshire are soft. If that holds for your street in Yeadon, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- Electrical connection by a qualified electrician, tested and certified
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- A check of your hot-water system, water pressure and flow rate
Decisions to make first
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
