- Postcode districts
- LS18, LS19, LS20
- Nearby
- Guiseley, Horsforth and Shipley
- Guide price
- £850–£2,300
- Typical time on site
- 1–2 working days
- Water
- Soft across most of West Yorkshire
- Survey
- Free, at your home
What does a replacement bath cost in Yeadon?
Our guide price for a replacement bath in Yeadon is £850–£2,300 including VAT. We adjust the national guide for Yorkshire and the Humber, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like bath
- New acrylic or steel bath, panel and taps
Shower bath
- Re-tiling to the bath area
Freestanding bath
- Freestanding acrylic or stone resin
Guide prices for Yeadon including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Yeadon
As well as Yeadon itself (LS18, LS19 and LS20), we survey in Guiseley, Horsforth and Shipley.
In Yeadon, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. Survey visits in Yeadon cover the bath, the tiles around it and the waste route, so the quote reflects your bathroom rather than a standard job. Before a new bath is ordered for a Yeadon home, we measure the stairs and landing as well as the opening.
Water across much of West Yorkshire is soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Filling the bath before sealing, so the silicone cures with the bath at its heaviest
- Levelling the bath on adjustable feet or a cradle, with timber battens fixed to the walls under the rim
- New flexible connectors or pipework, with isolation valves on the hot and cold supplies
- A survey of the bath opening, the floor, the waste route, the supplies and the tiles around the bath
Decisions to make first
Size
Most UK baths are 1700 × 700 mm. Going longer or wider than the old bath means re-tiling and checking that the new one fits up the stairs.
Freestanding bath
Acrylic freestanding baths are manageable on most floors; stone resin and cast iron are much heavier when full. You need room to clean round the bath and a plan for where the waste and filler come up.
Rules that apply in England
In England, Part G limits the hot water to a new bath to 48 °C at the outlet, usually with a thermostatic mixing valve, but only in a new dwelling or one created by a change of use. It does not apply to a replacement bath in an existing home, though a thermostatic valve is still sensible where children or older people bathe. New wiring for a shower over the bath or new lights is notifiable under Part P.
