- Postcode districts
- SP1, SP2
- Nearby
- Romsey, Andover and Totton
- Guide price
- £450–£3,600
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Wiltshire
- Survey
- Free, at your home
What does a new shower cost in Salisbury?
Our guide price for a new shower in Salisbury is £450–£3,600 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Salisbury including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Salisbury
As well as Salisbury itself (SP1 and SP2), we survey in Romsey, Andover and Totton.
Salisbury is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. If your Salisbury bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If you want a shower in your Salisbury home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.
Most of Wiltshire has hard water. If your supply in Salisbury is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of your hot-water system, water pressure and flow rate
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
Decisions to make first
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

