- Postcode districts
- BA12
- Nearby
- Westbury, Frome and Trowbridge
- Guide price
- £450–£3,600
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Wiltshire
- Survey
- Free, at your home
What does a new shower cost in Warminster?
Guide price in Warminster: £450–£3,600 including VAT, depending on the room and what you choose. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Warminster including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Warminster
As well as Warminster itself (BA12), we survey in Westbury, Frome and Trowbridge.
Being a smaller town does not change how we work in Warminster: free survey, written quote, one team. If you want a shower in your Warminster home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit. If the shower in your Warminster home swings between hot and cold, a thermostatic valve is usually the fix.
Supplies across most of Wiltshire are hard. If your supply in Warminster is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- A check of your hot-water system, water pressure and flow rate
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- Electrical connection by a qualified electrician, tested and certified
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

