- Postcode districts
- WR11
- Nearby
- Tewkesbury, Stratford-upon-Avon and Worcester
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Moderately hard across most of Worcestershire
- Survey
- Free, at your home
What does a new shower cost in Evesham?
In Evesham, a new shower typically costs £450–£3,400 including VAT, based on West Midlands prices. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Evesham including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Evesham
We work right across Evesham — WR11 — and in neighbouring Tewkesbury and Stratford-upon-Avon.
In Evesham, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Evesham bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If you are replacing a failed electric shower in Evesham, we check whether the existing cable and circuit suit the new unit.
Supplies across most of Worcestershire are moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Evesham. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
