- Postcode districts
- WR11
- Nearby
- Tewkesbury, Stratford-upon-Avon and Worcester
- Guide price
- £350–£1,200
- Typical time on site
- half a day to 2 days
- Water
- Moderately hard across most of Worcestershire
- Survey
- Free, at your home
What does new bathroom lighting cost in Evesham?
Our guide price for new bathroom lighting in Evesham is £350–£1,200 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- IP-rated LED downlights
Layered
- Shaver socket
Feature
- Dimming and sensors
Guide prices for Evesham including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Evesham
In Evesham we cover WR11; we also cover Tewkesbury, 11.3 miles away, and Stratford-upon-Avon.
In Evesham, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If you are refitting a windowless bathroom in Evesham, the lighting is planned with the extractor fan so the two work together. Bathroom lighting in Evesham is wired to BS 7671 with RCD protection, tested, and certified when it is finished.
Supplies across most of Worcestershire are moderately hard. Easy-clean glass and good-quality brassware are money well spent. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
Decisions to make first
Integrated or replaceable LED
Integrated LED downlights are slimmer and fully sealed. Fittings with replaceable lamps let you change brightness or colour later.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

