- Postcode districts
- CV37
- Nearby
- Warwick, Royal Leamington Spa and Kenilworth
- Guide price
- £350–£1,200
- Typical time on site
- half a day to 2 days
- Water
- Hard across most of Warwickshire
- Survey
- Free, at your home
What does new bathroom lighting cost in Stratford-upon-Avon?
Our guide price for new bathroom lighting in Stratford-upon-Avon is £350–£1,200 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- IP-rated LED downlights
Layered
- Shaver socket
Feature
- Dimming and sensors
Guide prices for Stratford-upon-Avon including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Stratford-upon-Avon
We cover every part of Stratford-upon-Avon, including CV37, and nearby Warwick (8.2 miles) and Royal Leamington Spa (10.2 miles).
In Stratford-upon-Avon, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If you are refitting a windowless bathroom in Stratford-upon-Avon, the lighting is planned with the extractor fan so the two work together. For Stratford-upon-Avon homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in.
Supplies across most of Warwickshire are hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- A shaver supply unit where wanted, positioned away from direct spray
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- Cable runs to each fitting, from the loft above or through the ceiling
Decisions to make first
Feature lighting
LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.
