What does a shower room cost on the Isle of Wight?
Our guide range on the Isle of Wight is £5,000–£10,000 including VAT. Prices on the Isle of Wight run at about 12% above the UK guide, based on South East England labour rates. Travel and delivery to islands and remote areas are priced on your quote.
Essential
- Tray, enclosure and mixer shower
Signature
- Fitted vanity and concealed cistern
Bespoke
- Underfloor heating, mirror cabinet
Guide prices for Isle of Wight including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover on the Isle of Wight?
Water across much of the Isle of Wight is hard. If your supply in Newport is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. We plan shower rooms in Newport around the waste route first, so the tray has a good fall and drains quickly.
What the job includes
- Recessed niches or shelving in the shower wall
- Removal of the old bath and suite, waste removal, testing and handover
- A low-profile tray or a tiled level floor, with the waste positioned for a good fall
- An enclosure, walk-in panel or frameless screen in toughened safety glass
- A basin and WC to suit the space, freestanding or set into a fitted furniture run
- Extractor fan, lighting and towel rail wired by a qualified electrician, tested and certified
Decisions to make first
Tray size
A 1200 by 800 mm or 1400 by 900 mm tray with a single panel makes a comfortable walk-in. Go as long as the room allows; length does more than width to keep spray inside.
Drain
A centre waste in a tray is the norm. A linear drain along one wall lets a tiled floor fall one way, so large tiles can run through.
Valve and heads
A bar valve is simple and easy to service. A concealed valve with a ceiling head looks cleaner but needs good flow to perform.
Tray or level floor
A low-profile stone-resin tray is quicker to fit and costs less. A tiled level floor looks seamless but needs a former, tanking and more floor preparation.
Rules that apply in England
Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.
In England, any change to the wiring in the shower room, or a new circuit for an electric shower, is notifiable under Part P. If you are replacing the fan, keep it at least as effective as the old one; Approved Document F gives 15 litres per second intermittent for a bathroom.

