What does a shower room cost in Leicestershire?
Our guide range in Leicestershire is £4,300–£8,600 including VAT. Prices in Leicestershire run at about 4% below the UK guide, based on East Midlands labour rates.
Essential
- Tray, enclosure and mixer shower
Signature
- Fitted vanity and concealed cistern
Bespoke
- Underfloor heating, mirror cabinet
Guide prices for Leicestershire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Leicestershire?
Most of Leicestershire has hard water. If your supply in Leicester is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your second bathroom in Leicester is too narrow for a bath, a long walk-in tray can often fit along the same wall.
What the job includes
- Recessed niches or shelving in the shower wall
- Tanking to the shower area, then wall and floor tiling
- A survey of water pressure and flow, the hot-water system and the floor where the tray or former will sit
- An enclosure, walk-in panel or frameless screen in toughened safety glass
- Extractor fan, lighting and towel rail wired by a qualified electrician, tested and certified
- A thermostatic shower valve, exposed or concealed, with a fixed head, a handset or both
Decisions to make first
Valve and heads
A bar valve is simple and easy to service. A concealed valve with a ceiling head looks cleaner but needs good flow to perform.
Storage
With no bath, there is often space for a full-width vanity unit or a tall cupboard for towels.
Drain
A centre waste in a tray is the norm. A linear drain along one wall lets a tiled floor fall one way, so large tiles can run through.
Glass
8 mm toughened glass is the usual standard for a walk-in panel. An easy-clean coating helps a great deal in hard-water areas.
Rules that apply in England
Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.
In England, any change to the wiring in the shower room, or a new circuit for an electric shower, is notifiable under Part P. If you are replacing the fan, keep it at least as effective as the old one; Approved Document F gives 15 litres per second intermittent for a bathroom.

