What does a shower room cost in Moray?
Our guide range in Moray is £4,300–£8,600 including VAT. Prices in Moray run at about 4% below the UK guide, based on Scotland labour rates.
Essential
- Tray, enclosure and mixer shower
Signature
- Fitted vanity and concealed cistern
Bespoke
- Underfloor heating, mirror cabinet
Guide prices for Moray including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Moray?
Most of Moray is supplied with soft water. If that holds for your street in Elgin, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your second bathroom in Elgin is too narrow for a bath, a long walk-in tray can often fit along the same wall.
What the job includes
- A low-profile tray or a tiled level floor, with the waste positioned for a good fall
- A basin and WC to suit the space, freestanding or set into a fitted furniture run
- An enclosure, walk-in panel or frameless screen in toughened safety glass
- A thermostatic shower valve, exposed or concealed, with a fixed head, a handset or both
- Extractor fan, lighting and towel rail wired by a qualified electrician, tested and certified
- Removal of the old bath and suite, waste removal, testing and handover
Decisions to make first
Glass
8 mm toughened glass is the usual standard for a walk-in panel. An easy-clean coating helps a great deal in hard-water areas.
Tray or level floor
A low-profile stone-resin tray is quicker to fit and costs less. A tiled level floor looks seamless but needs a former, tanking and more floor preparation.
Tray size
A 1200 by 800 mm or 1400 by 900 mm tray with a single panel makes a comfortable walk-in. Go as long as the room allows; length does more than width to keep spray inside.
Drain
A centre waste in a tray is the norm. A linear drain along one wall lets a tiled floor fall one way, so large tiles can run through.
Rules that apply in Scotland
Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.
In Scotland, building standards apply instead of Part P. A refit in the same room rarely needs a building warrant, but altering the drainage may. Water fittings must meet the Scottish Water Byelaws 2014.

