What does a shower room cost in Fife?
Our guide range in Fife is £4,300–£8,600 including VAT. Prices in Fife run at about 4% below the UK guide, based on Scotland labour rates.
Essential
- Tray, enclosure and mixer shower
Signature
- Fitted vanity and concealed cistern
Bespoke
- Underfloor heating, mirror cabinet
Guide prices for Fife including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Fife?
Most of Fife is supplied with soft water. If that holds for your street in Dunfermline, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. Where a Dunfermline shower room doubles as the guest bathroom, we plan storage so it stays clear of clutter.
What the job includes
- An enclosure, walk-in panel or frameless screen in toughened safety glass
- A survey of water pressure and flow, the hot-water system and the floor where the tray or former will sit
- A basin and WC to suit the space, freestanding or set into a fitted furniture run
- Extractor fan, lighting and towel rail wired by a qualified electrician, tested and certified
- Recessed niches or shelving in the shower wall
- A low-profile tray or a tiled level floor, with the waste positioned for a good fall
Decisions to make first
Valve and heads
A bar valve is simple and easy to service. A concealed valve with a ceiling head looks cleaner but needs good flow to perform.
Drain
A centre waste in a tray is the norm. A linear drain along one wall lets a tiled floor fall one way, so large tiles can run through.
Storage
With no bath, there is often space for a full-width vanity unit or a tall cupboard for towels.
Tray or level floor
A low-profile stone-resin tray is quicker to fit and costs less. A tiled level floor looks seamless but needs a former, tanking and more floor preparation.
Rules that apply in Scotland
Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.
In Scotland, building standards apply instead of Part P. A refit in the same room rarely needs a building warrant, but altering the drainage may. Water fittings must meet the Scottish Water Byelaws 2014.

