What does a shower room cost in Lanarkshire?
Our guide range in Lanarkshire is £4,300–£8,600 including VAT. Prices in Lanarkshire run at about 4% below the UK guide, based on Scotland labour rates.
Essential
- Basin and close-coupled WC
Signature
- Porcelain tiles throughout
Bespoke
- Tiled level-access floor
Guide prices for Lanarkshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Lanarkshire?
- East Kilbride
- Hamilton
- Cumbernauld
- Coatbridge
- Airdrie
- Motherwell
- Rutherglen
- Cambuslang
- Wishaw
- Bellshill
- Blantyre
- Larkhall
Most of Lanarkshire is supplied with soft water. If that holds for your street in East Kilbride, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are converting a bathroom in East Kilbride into a shower room, we price a tray and a tiled level floor side by side.
What the job includes
- A basin and WC to suit the space, freestanding or set into a fitted furniture run
- A thermostatic shower valve, exposed or concealed, with a fixed head, a handset or both
- An enclosure, walk-in panel or frameless screen in toughened safety glass
- Removal of the old bath and suite, waste removal, testing and handover
- Tanking to the shower area, then wall and floor tiling
- Extractor fan, lighting and towel rail wired by a qualified electrician, tested and certified
Decisions to make first
Storage
With no bath, there is often space for a full-width vanity unit or a tall cupboard for towels.
Glass
8 mm toughened glass is the usual standard for a walk-in panel. An easy-clean coating helps a great deal in hard-water areas.
Tray or level floor
A low-profile stone-resin tray is quicker to fit and costs less. A tiled level floor looks seamless but needs a former, tanking and more floor preparation.
Tray size
A 1200 by 800 mm or 1400 by 900 mm tray with a single panel makes a comfortable walk-in. Go as long as the room allows; length does more than width to keep spray inside.
Rules that apply in Scotland
Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.
In Scotland, building standards apply instead of Part P. A refit in the same room rarely needs a building warrant, but altering the drainage may. Water fittings must meet the Scottish Water Byelaws 2014.

