Shower rooms in Tyne and Wear

What does a shower room cost in Tyne and Wear?

Our guide range in Tyne and Wear is £4,000–£8,100 including VAT. Prices in Tyne and Wear run at about 10% below the UK guide, based on North East England labour rates.

Essential

£3,600–£5,400

Tiling to the shower area

Typical

Signature

£5,400–£8,100

Large walk-in tray and frameless screen

Bespoke

£8,100–£13,500

Concealed thermostatic or digital shower

Guide prices for Tyne and Wear including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Tyne and Wear?

Supplies across most of Tyne and Wear are soft. If that holds for your street in Newcastle upon Tyne, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your second bathroom in Newcastle upon Tyne is too narrow for a bath, a long walk-in tray can often fit along the same wall.

What the job includes

A low-profile tray or a tiled level floor, with the waste positioned for a good fall
An enclosure, walk-in panel or frameless screen in toughened safety glass
Extractor fan, lighting and towel rail wired by a qualified electrician, tested and certified
Removal of the old bath and suite, waste removal, testing and handover
Recessed niches or shelving in the shower wall
A thermostatic shower valve, exposed or concealed, with a fixed head, a handset or both

Decisions to make first

Valve and heads

A bar valve is simple and easy to service. A concealed valve with a ceiling head looks cleaner but needs good flow to perform.

Tray size

A 1200 by 800 mm or 1400 by 900 mm tray with a single panel makes a comfortable walk-in. Go as long as the room allows; length does more than width to keep spray inside.

Storage

With no bath, there is often space for a full-width vanity unit or a tall cupboard for towels.

Drain

A centre waste in a tray is the norm. A linear drain along one wall lets a tiled floor fall one way, so large tiles can run through.

Rules that apply in England

Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.

In England, any change to the wiring in the shower room, or a new circuit for an electric shower, is notifiable under Part P. If you are replacing the fan, keep it at least as effective as the old one; Approved Document F gives 15 litres per second intermittent for a bathroom.

Shower rooms in Tyne and Wear: questions

How much does a shower room cost in Tyne and Wear?

A shower room in Tyne and Wear typically costs £4,000–£8,100 including VAT, based on North East England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Tyne and Wear do you cover?

We cover the whole of Tyne and Wear, including Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington, Tynemouth, Wallsend and Newburn. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a shower room take?

Most jobs take 4–8 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Tyne and Wear?

What shower suits my water system?

It depends on your hot water. A combi boiler or unvented cylinder supplies mains pressure to a thermostatic mixer. A tank-fed system may need a pump, which must only be used on gravity systems. An electric shower heats cold mains water and suits a home without much stored hot water. See choosing a shower.