What does a small bathroom cost in Rutland?
Our guide range in Rutland is £4,300–£8,200 including VAT. Prices in Rutland run at about 4% below the UK guide, based on East Midlands labour rates.
Essential
- Space-saving bath or shower bath
Signature
- Wall-hung vanity and WC
Bespoke
- Underfloor heating
Guide prices for Rutland including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Rutland?
Supplies across most of Rutland are hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. We measure small bathrooms in Oakham to the centimetre before quoting, because 50 mm can decide whether a larger tray fits.
What the job includes
- Two or three layout options, each priced, so you can compare keeping the bath with a walk-in shower
- Lighting, extractor fan and towel rail wired by a qualified electrician, tested and certified
- Recessed niches, mirror cabinets and wall-hung vanity units to get storage off the floor
- Space-saving sanitaryware: a short-projection or wall-hung WC and a compact or semi-recessed basin
- Shorter, narrower or shower baths where a full 1700 mm bath does not sit well
- A measured survey including the door swing, window position, soil stack and any boxing that could be slimmed down
Decisions to make first
Door
Re-hanging the door to open outwards, or fitting a sliding door, frees the space behind it. In a very small room this alone can make space for a bigger shower.
Tiles and grout
Larger tiles with a grout close to the tile colour make walls look calmer. Running the same floor tile into the shower makes the floor look continuous.
Keep the bath or go walk-in
A 1500 or 1600 mm bath keeps a bath in a short room. A walk-in shower with a single glass panel opens up the floor and makes the room read as larger.
Storage
Recess shelves into stud walls or boxing, put a mirror cabinet over the basin and use the wall above the WC. Avoid floor-standing units in very tight rooms.
Rules that apply in England
A small bathroom refit in the same room does not need planning permission. The electrical zones matter more in a tight room because the lights and fan end up close to the shower: fittings above the bath or tray up to 2.25 m must be at least IPX4, and any socket other than a shaver supply unit must be at least 3 m from that zone, which in a small bathroom usually rules sockets out. Every circuit needs 30 mA RCD protection under BS 7671.
In England, changes to the wiring in a room with a bath or shower are notifiable under Part P, so use an electrician registered with a competent person scheme. If you replace the extractor fan, do not fit one that extracts less than the old one; Approved Document F gives 15 litres per second for an intermittent bathroom fan.

