What does a bathroom strip-out cost in Cornwall?
Our guide range in Cornwall is £600–£1,850 including VAT.
Strip-out only
- Pipework capped safely
Strip-out and prep
- Ready for fitting
Back to brick
- Plaster and tiles removed
Guide prices for Cornwall including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Cornwall?
Supplies across most of Cornwall are soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier. We time strip-outs in Redruth for just before the fit, so you are not left without a bathroom while waiting for products.
What the job includes
- Isolating the water and capping the supply to each fitting with a proper end, then checking for leaks
- Removal of the bath or shower tray, enclosure, basin, WC, furniture and accessories
- Waste loaded and taken away by a licensed waste carrier
- The soil pipe sealed against smells once the WC is off
- Lights, fan, shaver socket and heated rail disconnected and made safe by a qualified electrician where needed
- A note of what was found: floor and wall condition, pipe runs and any damaged timber
Decisions to make first
Timing
Strip out just before the fit rather than weeks ahead, so the house is without a bathroom for as short a time as possible.
The floor
Old vinyl or tiles on a ply overlay can come up with the ply. Tiles bonded to a screed may need grinding back or overlaying instead.
Asbestos testing
In a home built before 2000, a sample test before work starts settles whether a ceiling coating, floor tile or boxing panel needs specialist removal.
Strip-out only or with prep
Strip-out only leaves walls and floors as found. With prep, walls are boarded or patched and the floor checked and overlaid, ready for fitting.
Rules that apply in England
Homes built before 2000 can contain asbestos in textured ceiling coatings, old floor tiles, cistern lids and boxing panels, so suspect materials should be tested before strip-out if there is any doubt. Bathroom waste should be taken away by a licensed waste carrier. Disconnecting electrical items should leave every circuit safe and is a job for a qualified electrician, and any work near a boiler or gas pipe is for a Gas Safe registered engineer.
In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

