Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
County Durham · TS18

Bathroom strip-out in Stockton-on-Tees

From TS18 to TS20, we survey and quote for bathroom strip-out across Stockton-on-Tees. You get one point of contact and a fixed written price once the details are agreed.

£550–£1,600 inc VAT1–2 working daysFree home survey
Old bathroom being stripped out ready for a new fit, example for Stockton-on-Tees
Postcode districts
TS18, TS19, TS20
Nearby
Billingham, Thornaby-on-Tees and Middlesbrough
Guide price
£550–£1,600
Typical time on site
1–2 working days
Water
Moderately hard across most of County Durham
Survey
Free, at your home

What does a bathroom strip-out cost in Stockton-on-Tees?

Our guide price for a bathroom strip-out in Stockton-on-Tees is £550–£1,600 including VAT. Prices in North East England run at about 10% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Strip-out and prep

£900–£1,600
  • Walls boarded or patched

Back to brick

£1,350–£2,700
  • Rotten timber found and repaired

Guide prices for Stockton-on-Tees including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Stockton-on-Tees

As well as Stockton-on-Tees itself (TS18, TS19 and TS20), we survey in Billingham, Thornaby-on-Tees and Middlesbrough.

Stockton-on-Tees has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. Landlords in Stockton-on-Tees can book a strip-out to see the real condition of a damaged bathroom before choosing between a refit and a renovation. For Stockton-on-Tees homes built before 2000, we ask about textured ceilings and old floor tiles before quoting a strip-out.

Supplies across most of County Durham are moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Isolating the water and capping the supply to each fitting with a proper end, then checking for leaks
  • Wall and floor tiles taken off with as little damage as possible to sound plaster
  • Waste loaded and taken away by a licensed waste carrier
  • A note of what was found: floor and wall condition, pipe runs and any damaged timber

Decisions to make first

Keep or lose the plaster

Tiles often come off leaving plaster that can be tiled again. If the plaster comes away with them, the wall is boarded or re-plastered.

Timing

Strip out just before the fit rather than weeks ahead, so the house is without a bathroom for as short a time as possible.

Rules that apply in England

In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

More about bathroom strip-out

Bathroom strip-out in Stockton-on-Tees: questions

How much should I budget for a bathroom strip-out in Stockton-on-Tees?

A bathroom strip-out in Stockton-on-Tees usually costs £550–£1,600 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Is the water hard in Stockton-on-Tees?

Supplies across most of County Durham are moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a bathroom strip-out in Stockton-on-Tees?

Building control for Stockton-on-Tees is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a bathroom strip-out take?

Allow 1–2 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Stockton-on-Tees.

How do you get a cast-iron bath out?

A cast-iron bath can weigh well over 100 kg, so it is usually broken up in place with the room protected, unless you want to keep it. Taking one out whole needs several people, a clear route and care on the stairs. Tell us at the survey if you want it saved.

Bathroom strip-out in Stockton-on-Tees

Book a free home survey in Stockton-on-Tees. You get a measured layout and an itemised written price before anything is ordered.