Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Derbyshire · DE72

Bathroom strip-out in Long Eaton

From DE72 to NG10, we survey and quote for bathroom strip-out across Long Eaton. You get one point of contact and a fixed written price once the details are agreed.

£600–£1,750 inc VAT1–2 working daysFree home survey
Old bathroom being stripped out ready for a new fit, example for Long Eaton
Postcode districts
DE72, NG9, NG10
Nearby
Ilkeston, Nottingham and West Bridgford
Guide price
£600–£1,750
Typical time on site
1–2 working days
Water
Moderately hard across most of Derbyshire
Survey
Free, at your home

What does a bathroom strip-out cost in Long Eaton?

Our guide price for a bathroom strip-out in Long Eaton is £600–£1,750 including VAT. Labour costs in East Midlands put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Strip-out and prep

£950–£1,750
  • Walls boarded or patched

Back to brick

£1,450–£2,900
  • Rotten timber found and repaired

Guide prices for Long Eaton including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Long Eaton

We work right across Long Eaton — DE72, NG9 and NG10 — and in neighbouring Ilkeston and Nottingham.

In Long Eaton, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. Strip-outs in Long Eaton include the waste going away with a licensed carrier, so nothing is left on the drive or the pavement. If your Long Eaton bathroom is upstairs, the stairs and landing are protected before anything heavy comes down.

Water across much of Derbyshire is moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Waste loaded and taken away by a licensed waste carrier
  • Dust sheets and floor protection on the route out through the house
  • The soil pipe sealed against smells once the WC is off
  • Lights, fan, shaver socket and heated rail disconnected and made safe by a qualified electrician where needed

Decisions to make first

Strip-out only or with prep

Strip-out only leaves walls and floors as found. With prep, walls are boarded or patched and the floor checked and overlaid, ready for fitting.

Keep or lose the plaster

Tiles often come off leaving plaster that can be tiled again. If the plaster comes away with them, the wall is boarded or re-plastered.

Rules that apply in England

In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

More about bathroom strip-out

Bathroom strip-out in Long Eaton: questions

What is the price of a bathroom strip-out in Long Eaton?

A bathroom strip-out in Long Eaton usually costs £600–£1,750 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Is the water hard in Long Eaton?

Water across much of Derbyshire is moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a bathroom strip-out in Long Eaton?

Building control for Long Eaton is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a bathroom strip-out take?

Allow 1–2 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Long Eaton.

How do you get a cast-iron bath out?

A cast-iron bath can weigh well over 100 kg, so it is usually broken up in place with the room protected, unless you want to keep it. Taking one out whole needs several people, a clear route and care on the stairs. Tell us at the survey if you want it saved.

Bathroom strip-out in Long Eaton

Book a free home survey in Long Eaton. You get a measured layout and an itemised written price before anything is ordered.