Bathroom strip-out in Queensferry

Postcode districts: EH30
Nearby: Broxburn, Dunfermline and Currie
Guide price: £600–£1,750
Typical time on site: 1–2 working days
Water: Soft across most of Edinburgh
Survey: Free, at your home

What does a bathroom strip-out cost in Queensferry?

For Queensferry, our guide range for a bathroom strip-out is £600 to £1,750 including VAT. Prices in Scotland run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Strip-out only

£600–£950

Waste taken away

Strip-out and prep

£950–£1,750

Walls boarded or patched

Back to brick

£1,450–£2,900

Rotten timber found and repaired

Guide prices for Queensferry including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Queensferry

In Queensferry we cover EH30; we also cover Broxburn, 4.8 miles away, and Dunfermline.

Being a smaller town does not change how we work in Queensferry: free survey, written quote, one team. Strip-outs in Queensferry include the waste going away with a licensed carrier, so nothing is left on the drive or the pavement. If you are fitting your own bathroom in Queensferry, a separate strip-out gets the heavy work and the waste dealt with first.

Most of Edinburgh is supplied with soft water. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Waste loaded and taken away by a licensed waste carrier
Removal of the bath or shower tray, enclosure, basin, WC, furniture and accessories
Wall and floor tiles taken off with as little damage as possible to sound plaster
Isolating the water and capping the supply to each fitting with a proper end, then checking for leaks

Decisions to make first

Strip-out only or with prep

Strip-out only leaves walls and floors as found. With prep, walls are boarded or patched and the floor checked and overlaid, ready for fitting.

The floor

Old vinyl or tiles on a ply overlay can come up with the ply. Tiles bonded to a screed may need grinding back or overlaying instead.

Rules that apply in Scotland

In Scotland, removal work does not need a building warrant, but structural work, altering drainage or forming a new bathroom afterwards may. Where a warrant is needed, it has to be granted before that work starts, so plan the strip-out around it.

More about bathroom strip-out

Bathroom strip-out in Queensferry: questions

What is the price of a bathroom strip-out in Queensferry?

A bathroom strip-out in Queensferry usually costs £600–£1,750 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover EH30 in Queensferry?

Yes. We cover all of Queensferry, including EH30, and nearby Broxburn, Dunfermline and Currie. Survey visits are free and arranged at a time that suits you.

Is the water hard in Queensferry?

Will a bathroom strip-out in Queensferry need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

Can I strip out my own bathroom?

You can, but cap every supply properly, have the electrics made safe by an electrician, and test for asbestos first in a home built before 2000. The waste must go to a licensed waste carrier or a household waste site that accepts it. Some fitters prefer to do the strip-out themselves so they know exactly what they are fitting onto, so ask yours first.