Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Edinburgh · EH30

Underfloor heating in Queensferry

If you are planning bathroom underfloor heating in Queensferry, the first step is a free survey visit: we measure, check your pipework and electrics, and give you a written quote.

£650–£2,400 inc VAT1–2 working days (added to a fit)Free home survey
Electric underfloor heating mat laid before tiling, example for Queensferry
Postcode districts
EH30
Nearby
Broxburn, Dunfermline and Currie
Guide price
£650–£2,400
Typical time on site
1–2 working days (added to a fit)
Water
Soft across most of Edinburgh
Survey
Free, at your home

What does bathroom underfloor heating cost in Queensferry?

As a guide, budget £650 to £2,400 including VAT for bathroom underfloor heating in Queensferry; your written quote will pin it down. Prices in Scotland run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Electric, larger room

£1,150–£2,100
  • Electrician sign-off

Wet system

£1,450–£2,900
  • Pipes linked to the heating

Guide prices for Queensferry including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Queensferry

We work right across Queensferry — EH30 — and in neighbouring Broxburn and Dunfermline.

Being a smaller town does not change how we work in Queensferry: free survey, written quote, one team. Where a Queensferry home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric. If your Queensferry bathroom has a cold tiled floor and no room for a bigger radiator, an electric mat under new tiles is the simplest answer.

Water across much of Edinburgh is soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Bringing the system up to temperature gradually once the adhesive and grout have cured
  • Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
  • A floor sensor set between the heating runs and wired back to the thermostat
  • Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed

Decisions to make first

Floor heating and towel rail

Underfloor heating warms the room; a towel rail dries towels. Many bathrooms have both, and a dual-fuel rail keeps working in summer when the boiler is off.

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Rules that apply in Scotland

Scotland has no Part P. Underfloor heating added during a straight bathroom refit rarely needs a building warrant on its own, but it must be installed, tested and certified to BS 7671 with RCD protection.

More about underfloor heating

Underfloor heating in Queensferry: questions

How much should I budget for bathroom underfloor heating in Queensferry?

Bathroom underfloor heating in Queensferry usually costs £650–£2,400 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Do you cover EH30 in Queensferry?

Yes. We cover all of Queensferry, including EH30, and nearby Broxburn, Dunfermline and Currie. Survey visits are free and arranged at a time that suits you.

Is the water hard in Queensferry?

Water across much of Edinburgh is soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Will bathroom underfloor heating in Queensferry need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

Is electric underfloor heating expensive to run in a bathroom?

Running cost depends on the heated area, the insulation under the mat, how long it runs and your electricity tariff. As an example, a 150 W per m² mat covering 3 m² draws 450 W, so two hours a day uses about 0.9 kWh. A timer and floor sensor stop it running when nobody is using the room.

Underfloor heating in Queensferry

Book a free home survey in Queensferry. You get a measured layout and an itemised written price before anything is ordered.