Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Fife · KY12

Underfloor heating in Dunfermline

Underfloor heating in Dunfermline, planned from measurements taken in your home and priced in writing. We cover KY12 and the surrounding area.

£650–£2,400 inc VAT1–2 working days (added to a fit)Free home survey
Electric underfloor heating mat laid before tiling, example for Dunfermline
Postcode districts
KY12
Nearby
Queensferry, Broxburn and Grangemouth
Guide price
£650–£2,400
Typical time on site
1–2 working days (added to a fit)
Water
Soft across most of Fife
Survey
Free, at your home

What does bathroom underfloor heating cost in Dunfermline?

In Dunfermline, bathroom underfloor heating typically costs £650–£2,400 including VAT, based on Scotland prices. We adjust the national guide for Scotland, where prices are typically about 4% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Electric, larger room

£1,150–£2,100
  • Programmable smart thermostat

Wet system

£1,450–£2,900
  • Screed or low-profile boards

Guide prices for Dunfermline including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Dunfermline

As well as Dunfermline itself (KY12), we survey in Queensferry, Broxburn and Grangemouth.

Dunfermline is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. We check door thresholds in Dunfermline homes at the survey, because underfloor heating and new tiles raise the floor slightly. Where a Dunfermline home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric.

Water across much of Fife is soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
  • A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
  • A floor sensor set between the heating runs and wired back to the thermostat
  • Bringing the system up to temperature gradually once the adhesive and grout have cured

Decisions to make first

Thermostat

A simple dial thermostat, a programmable one with set times, or a smart thermostat you can control from your phone.

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Rules that apply in Scotland

Scotland has no Part P. Underfloor heating added during a straight bathroom refit rarely needs a building warrant on its own, but it must be installed, tested and certified to BS 7671 with RCD protection.

More about underfloor heating

Underfloor heating in Dunfermline: questions

How much should I budget for bathroom underfloor heating in Dunfermline?

Bathroom underfloor heating in Dunfermline usually costs £650–£2,400 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover KY12 in Dunfermline?

Yes. We cover all of Dunfermline, including KY12, and nearby Queensferry, Broxburn and Grangemouth. Survey visits are free and arranged at a time that suits you.

Is the water hard in Dunfermline?

Water across much of Fife is soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Will bathroom underfloor heating in Dunfermline need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

Is electric underfloor heating expensive to run in a bathroom?

Running cost depends on the heated area, the insulation under the mat, how long it runs and your electricity tariff. As an example, a 150 W per m² mat covering 3 m² draws 450 W, so two hours a day uses about 0.9 kWh. A timer and floor sensor stop it running when nobody is using the room.

Underfloor heating in Dunfermline

Book a free home survey in Dunfermline. You get a measured layout and an itemised written price before anything is ordered.