- Postcode districts
- SS7, SS8
- Nearby
- South Benfleet, Hadleigh and Pitsea
- Guide price
- £650–£1,900
- Typical time on site
- 1–2 working days
- Water
- Very hard across most of Essex
- Survey
- Free, at your home
What does a bathroom strip-out cost in Canvey Island?
For Canvey Island, our guide range for a bathroom strip-out is £650 to £1,900 including VAT. We adjust the national guide for East of England, where prices are typically about 6% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Strip-out only
- Pipework capped safely
Strip-out and prep
- Ready for fitting
Back to brick
- Plaster and tiles removed
Guide prices for Canvey Island including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Canvey Island
We cover every part of Canvey Island, including SS7 and SS8, and nearby South Benfleet (2.3 miles) and Hadleigh (2.5 miles).
In Canvey Island, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Canvey Island bathroom is upstairs, the stairs and landing are protected before anything heavy comes down. For Canvey Island homes built before 2000, we ask about textured ceilings and old floor tiles before quoting a strip-out.
Most of Essex has very hard water. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Waste loaded and taken away by a licensed waste carrier
- Isolating the water and capping the supply to each fitting with a proper end, then checking for leaks
- Wall and floor tiles taken off with as little damage as possible to sound plaster
- Dust sheets and floor protection on the route out through the house
Decisions to make first
Strip-out only or with prep
Strip-out only leaves walls and floors as found. With prep, walls are boarded or patched and the floor checked and overlaid, ready for fitting.
The floor
Old vinyl or tiles on a ply overlay can come up with the ply. Tiles bonded to a screed may need grinding back or overlaying instead.
Rules that apply in England
In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.
