Wet rooms in Canvey Island

Postcode districts: SS7, SS8
Nearby: South Benfleet, Hadleigh and Pitsea
Guide price: £6,400–£12,750
Typical time on site: 5–10 working days
Water: Very hard across most of Essex
Survey: Free, at your home

What does a wet room cost in Canvey Island?

Guide price in Canvey Island: £6,400–£12,750 including VAT, depending on the room and what you choose. Prices in East of England run at about 6% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Compact

£4,800–£7,400

Full tanking, porcelain tiles

Typical

Signature

£7,400–£12,750

4–7 m² room

Large or luxury

£12,750–£19,000

Large-format or stone-effect tiles

Guide prices for Canvey Island including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Canvey Island

We cover every part of Canvey Island, including SS7 and SS8, and nearby South Benfleet (2.3 miles) and Hadleigh (2.5 miles).

Homes in and around Canvey Island vary, so we look at the floor, the walls and the water system before we price anything. For a wet room in a Canvey Island flat, the first step is the lease, because freeholder consent is often needed before any work starts. In a compact Canvey Island bathroom, a wet room frees the space a tray and enclosure would take, but expect the whole floor to get wet.

Water across much of Essex is very hard. If your supply in Canvey Island is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A pre-formed floor former with a linear or centre drain, or a screed laid to fall
A survey of the floor construction, the joist size and direction or the concrete slab, and the route to the soil stack
Floor strengthening or a ply overlay on timber floors so the surface does not flex
Extractor fan and lighting by a qualified electrician, tested and certified, with underfloor heating if you choose it

Decisions to make first

Floor tile

Matt or textured porcelain with good slip resistance. Mosaic gives extra grip on a centre-drain floor because of its many grout lines.

Former or screed

A pre-formed board gives a consistent fall and suits timber floors. A sand and cement screed suits concrete slabs and larger shower areas.

Rules that apply in England

In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.

More about wet rooms

Wet rooms in Canvey Island: questions

How much does a wet room cost in Canvey Island?

A wet room in Canvey Island usually costs £6,400–£12,750 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Do you cover SS7 and SS8 in Canvey Island?

Yes. We cover all of Canvey Island, including SS7 and SS8, and nearby South Benfleet, Hadleigh and Pitsea. Survey visits are free and arranged at a time that suits you.

Is the water hard in Canvey Island?

Who handles building control for a wet room in Canvey Island?

Building control for Canvey Island is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Do wet rooms leak?

A properly tanked wet room should not leak. When one does, the cause is usually a gap in the membrane at a corner or pipe, a poor drain connection, or a floor that flexes and splits the seal. Leaks in wet rooms are expensive to trace, which is why the floor is stiffened first and the tanking is checked before tiling.