- Postcode districts
- SE3, SE10, SE13
- Nearby
- Greenwich, Catford and Eltham
- Guide price
- £750–£2,200
- Typical time on site
- 1–2 working days
- Water
- Very hard across most of Greater London
- Survey
- Free, at your home
What does a bathroom strip-out cost in Blackheath?
Guide price in Blackheath: £750–£2,200 including VAT, depending on the room and what you choose. Labour costs in London put local prices at about 25% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Strip-out only
- Waste taken away
Strip-out and prep
- Walls boarded or patched
Back to brick
- Rotten timber found and repaired
Guide prices for Blackheath including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Blackheath
We cover every part of Blackheath, including SE3, SE10 and SE13, and nearby Greenwich (1.2 miles) and Catford (1.8 miles).
London homes in Blackheath often mean stairs, permits and neighbours below; we plan the logistics as carefully as the bathroom. Landlords in Blackheath can book a strip-out to see the real condition of a damaged bathroom before choosing between a refit and a renovation. Strip-outs in Blackheath include the waste going away with a licensed carrier, so nothing is left on the drive or the pavement.
Supplies across most of Greater London are very hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Lights, fan, shaver socket and heated rail disconnected and made safe by a qualified electrician where needed
- A note of what was found: floor and wall condition, pipe runs and any damaged timber
- Waste loaded and taken away by a licensed waste carrier
- Removal of the bath or shower tray, enclosure, basin, WC, furniture and accessories
Decisions to make first
Keep or lose the plaster
Tiles often come off leaving plaster that can be tiled again. If the plaster comes away with them, the wall is boarded or re-plastered.
The floor
Old vinyl or tiles on a ply overlay can come up with the ply. Tiles bonded to a screed may need grinding back or overlaying instead.
Rules that apply in England
In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

