Bathroom strip-out in Canary Wharf

Postcode districts: E3, E14, SE16
Nearby: Bow, Canning Town and Greenwich
Guide price: £750–£2,200
Typical time on site: 1–2 working days
Water: Very hard across most of Greater London
Survey: Free, at your home

What does a bathroom strip-out cost in Canary Wharf?

Guide price in Canary Wharf: £750–£2,200 including VAT, depending on the room and what you choose. Prices in London run at about 25% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Strip-out only

£750–£1,250

Suite, tiles and fittings removed

Strip-out and prep

£1,250–£2,200

Floor checked and overlaid

Back to brick

£1,900–£3,800

Room ready for a full renovation

Guide prices for Canary Wharf including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Canary Wharf

In Canary Wharf we cover E3, E14 and SE16; we also cover Bow, 1.5 miles away, and Canning Town.

In Canary Wharf, many bathrooms are in flats or converted houses, so we check lease consents, access and the floor below before we price. Strip-outs in Canary Wharf include the waste going away with a licensed carrier, so nothing is left on the drive or the pavement. If you are fitting your own bathroom in Canary Wharf, a separate strip-out gets the heavy work and the waste dealt with first.

Most of Greater London has very hard water. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Wall and floor tiles taken off with as little damage as possible to sound plaster
The soil pipe sealed against smells once the WC is off
A note of what was found: floor and wall condition, pipe runs and any damaged timber
Isolating the water and capping the supply to each fitting with a proper end, then checking for leaks

Decisions to make first

Keep or lose the plaster

Tiles often come off leaving plaster that can be tiled again. If the plaster comes away with them, the wall is boarded or re-plastered.

Strip-out only or with prep

Strip-out only leaves walls and floors as found. With prep, walls are boarded or patched and the floor checked and overlaid, ready for fitting.

Rules that apply in England

In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

More about bathroom strip-out

Bathroom strip-out in Canary Wharf: questions

What is the price of a bathroom strip-out in Canary Wharf?

A bathroom strip-out in Canary Wharf usually costs £750–£2,200 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the water hard in Canary Wharf?

Who handles building control for a bathroom strip-out in Canary Wharf?

Building control for Canary Wharf is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a bathroom strip-out take?

Allow 1–2 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Canary Wharf.

How do you get a cast-iron bath out?

A cast-iron bath can weigh well over 100 kg, so it is usually broken up in place with the room protected, unless you want to keep it. Taking one out whole needs several people, a clear route and care on the stairs. Tell us at the survey if you want it saved.