Bathroom strip-out in Willesden

Postcode districts: NW6, NW10, W10
Nearby: Cricklewood, Shepherds Bush and Kilburn
Guide price: £750–£2,200
Typical time on site: 1–2 working days
Water: Very hard across most of Greater London
Survey: Free, at your home

What does a bathroom strip-out cost in Willesden?

For Willesden, our guide range for a bathroom strip-out is £750 to £2,200 including VAT. Labour costs in London put local prices at about 25% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Strip-out only

£750–£1,250

Suite, tiles and fittings removed

Strip-out and prep

£1,250–£2,200

Floor checked and overlaid

Back to brick

£1,900–£3,800

Room ready for a full renovation

Guide prices for Willesden including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Willesden

In Willesden we cover NW6, NW10 and W10; we also cover Cricklewood, 1.8 miles away, and Shepherds Bush.

In Willesden, many bathrooms are in flats or converted houses, so we check lease consents, access and the floor below before we price. If you are fitting your own bathroom in Willesden, a separate strip-out gets the heavy work and the waste dealt with first. For Willesden homes built before 2000, we ask about textured ceilings and old floor tiles before quoting a strip-out.

Most of Greater London has very hard water. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Lights, fan, shaver socket and heated rail disconnected and made safe by a qualified electrician where needed
Wall and floor tiles taken off with as little damage as possible to sound plaster
A note of what was found: floor and wall condition, pipe runs and any damaged timber
Isolating the water and capping the supply to each fitting with a proper end, then checking for leaks

Decisions to make first

The floor

Old vinyl or tiles on a ply overlay can come up with the ply. Tiles bonded to a screed may need grinding back or overlaying instead.

Keep or lose the plaster

Tiles often come off leaving plaster that can be tiled again. If the plaster comes away with them, the wall is boarded or re-plastered.

Rules that apply in England

In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

More about bathroom strip-out

Bathroom strip-out in Willesden: questions

How much does a bathroom strip-out cost in Willesden?

A bathroom strip-out in Willesden usually costs £750–£2,200 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Do you cover NW6 in Willesden?

Yes. We cover all of Willesden, including NW6, NW10 and W10, and nearby Cricklewood, Shepherds Bush and Kilburn. Survey visits are free and arranged at a time that suits you.

Is the water hard in Willesden?

Who handles building control for a bathroom strip-out in Willesden?

Building control for Willesden is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can I strip out my own bathroom?

You can, but cap every supply properly, have the electrics made safe by an electrician, and test for asbestos first in a home built before 2000. The waste must go to a licensed waste carrier or a household waste site that accepts it. Some fitters prefer to do the strip-out themselves so they know exactly what they are fitting onto, so ask yours first.