Bathroom strip-out in Basingstoke

Postcode districts: RG21, RG22, RG23, RG24
Nearby: Tadley, Alton and Fleet
Guide price: £650–£2,000
Typical time on site: 1–2 working days
Water: Hard across most of Hampshire
Survey: Free, at your home

What does a bathroom strip-out cost in Basingstoke?

Guide price in Basingstoke: £650–£2,000 including VAT, depending on the room and what you choose. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Strip-out only

£650–£1,100

Waste taken away

Strip-out and prep

£1,100–£2,000

Walls boarded or patched

Back to brick

£1,700–£3,400

Rotten timber found and repaired

Guide prices for Basingstoke including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Basingstoke

In Basingstoke we cover RG21, RG22, RG23 and 1 more postcode districts; we also cover Tadley, 6.3 miles away, and Alton.

Basingstoke has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. We time strip-outs in Basingstoke for just before the fit, so you are not left without a bathroom while waiting for products. Strip-outs in Basingstoke include the waste going away with a licensed carrier, so nothing is left on the drive or the pavement.

Supplies across most of Hampshire are hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Wall and floor tiles taken off with as little damage as possible to sound plaster
Isolating the water and capping the supply to each fitting with a proper end, then checking for leaks
Removal of the bath or shower tray, enclosure, basin, WC, furniture and accessories
A note of what was found: floor and wall condition, pipe runs and any damaged timber

Decisions to make first

The floor

Old vinyl or tiles on a ply overlay can come up with the ply. Tiles bonded to a screed may need grinding back or overlaying instead.

Salvage

If you want to keep a cast-iron bath, a radiator or a piece of furniture, say so before we start, so it comes out whole rather than in pieces.

Rules that apply in England

In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

More about bathroom strip-out

Bathroom strip-out in Basingstoke: questions

What is the price of a bathroom strip-out in Basingstoke?

A bathroom strip-out in Basingstoke usually costs £650–£2,000 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the water hard in Basingstoke?

Who handles building control for a bathroom strip-out in Basingstoke?

Building control for Basingstoke is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a bathroom strip-out take?

Allow 1–2 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Basingstoke.

How do you get a cast-iron bath out?

A cast-iron bath can weigh well over 100 kg, so it is usually broken up in place with the room protected, unless you want to keep it. Taking one out whole needs several people, a clear route and care on the stairs. Tell us at the survey if you want it saved.