Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Tyne and Wear · NE29

Bathroom strip-out in South Shields

From NE29 to NE33, we survey and quote for bathroom strip-out across South Shields. You get one point of contact and a fixed written price once the details are agreed.

£550–£1,600 inc VAT1–2 working daysFree home survey
Old bathroom being stripped out ready for a new fit, example for South Shields
Postcode districts
NE29, NE30, NE33
Nearby
Tynemouth, North Shields and Jarrow
Guide price
£550–£1,600
Typical time on site
1–2 working days
Water
Soft across most of Tyne and Wear
Survey
Free, at your home

What does a bathroom strip-out cost in South Shields?

Our guide price for a bathroom strip-out in South Shields is £550–£1,600 including VAT. We adjust the national guide for North East England, where prices are typically about 10% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Strip-out and prep

£900–£1,600
  • Walls boarded or patched

Back to brick

£1,350–£2,700
  • Rotten timber found and repaired

Guide prices for South Shields including VAT. Your itemised written quote after the free survey is the price that counts.

Working in South Shields

In South Shields we cover NE29, NE30 and NE33; we also cover Tynemouth, 1.4 miles away, and North Shields.

South Shields has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. We time strip-outs in South Shields for just before the fit, so you are not left without a bathroom while waiting for products. If your South Shields bathroom is upstairs, the stairs and landing are protected before anything heavy comes down.

Most of Tyne and Wear is supplied with soft water. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Waste loaded and taken away by a licensed waste carrier
  • Wall and floor tiles taken off with as little damage as possible to sound plaster
  • Removal of the bath or shower tray, enclosure, basin, WC, furniture and accessories
  • A note of what was found: floor and wall condition, pipe runs and any damaged timber

Decisions to make first

The floor

Old vinyl or tiles on a ply overlay can come up with the ply. Tiles bonded to a screed may need grinding back or overlaying instead.

Strip-out only or with prep

Strip-out only leaves walls and floors as found. With prep, walls are boarded or patched and the floor checked and overlaid, ready for fitting.

Rules that apply in England

In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

More about bathroom strip-out

Bathroom strip-out in South Shields: questions

How much does a bathroom strip-out cost in South Shields?

A bathroom strip-out in South Shields usually costs £550–£1,600 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the water hard in South Shields?

Most of Tyne and Wear is supplied with soft water. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a bathroom strip-out in South Shields?

Building control for South Shields is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a bathroom strip-out take?

Allow 1–2 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in South Shields.

How do you get a cast-iron bath out?

A cast-iron bath can weigh well over 100 kg, so it is usually broken up in place with the room protected, unless you want to keep it. Taking one out whole needs several people, a clear route and care on the stairs. Tell us at the survey if you want it saved.

Bathroom strip-out in South Shields

Book a free home survey in South Shields. You get a measured layout and an itemised written price before anything is ordered.