- Postcode districts
- RG2, RG5, RG6
- Nearby
- Reading, Wokingham and Crowthorne
- Guide price
- £800–£2,800
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Hard across most of Berkshire
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Lower Earley?
Our guide price for bathroom underfloor heating in Lower Earley is £800–£2,800 including VAT. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Thermostat and RCD-protected supply
Electric, larger room
- Whole floor coverage
Wet system
- Manifold or single-zone kit
Guide prices for Lower Earley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Lower Earley
In Lower Earley we cover RG2, RG5 and RG6; we also cover Reading, 3 miles away, and Wokingham.
In Lower Earley, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Lower Earley bathroom has a cold tiled floor and no room for a bigger radiator, an electric mat under new tiles is the simplest answer. If your Lower Earley home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below.
Water across much of Berkshire is hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
- A floor sensor set between the heating runs and wired back to the thermostat
- A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
- Bringing the system up to temperature gradually once the adhesive and grout have cured
Decisions to make first
Insulation board thickness
Thicker boards warm up faster and lose less heat downwards, but raise the floor; the right choice depends on the door threshold and the next room.
Electric or wet
Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.
Rules that apply in England
In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.
