Underfloor heating in Reading

Postcode districts: RG1, RG2, RG4, RG30, RG31
Nearby: Lower Earley, Wokingham and Crowthorne
Guide price: £800–£2,800
Typical time on site: 1–2 working days (added to a fit)
Water: Hard across most of Berkshire
Survey: Free, at your home

What does bathroom underfloor heating cost in Reading?

Our guide price for bathroom underfloor heating in Reading is £800–£2,800 including VAT. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£800–£1,700

Insulation board

Electric, larger room

£1,350–£2,500

Electrician sign-off

Wet system

£1,700–£3,400

Pipes linked to the heating

Guide prices for Reading including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Reading

We work right across Reading — RG1, RG2, RG4 and 2 more postcode districts — and in neighbouring Lower Earley and Wokingham.

Reading is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. Whether your Reading bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room. For Reading homes having the bathroom floor replaced, underfloor heating adds one to two days to the fit.

Supplies across most of Berkshire are hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
A check of the floor construction, the room's heat loss and where the thermostat and supply will go
Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded

Decisions to make first

Floor finish

Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.

Floor heating and towel rail

Underfloor heating warms the room; a towel rail dries towels. Many bathrooms have both, and a dual-fuel rail keeps working in summer when the boiler is off.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Reading: questions

What is the price of bathroom underfloor heating in Reading?

Bathroom underfloor heating in Reading usually costs £800–£2,800 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover RG1 in Reading?

Yes. We cover all of Reading, including RG1, RG2, RG4, RG30 and 1 more postcode districts, and nearby Lower Earley, Wokingham and Crowthorne. Survey visits are free and arranged at a time that suits you.

Is the water hard in Reading?

Who handles building control for bathroom underfloor heating in Reading?

Building control for Reading is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Is electric underfloor heating expensive to run in a bathroom?

Running cost depends on the heated area, the insulation under the mat, how long it runs and your electricity tariff. As an example, a 150 W per m² mat covering 3 m² draws 450 W, so two hours a day uses about 0.9 kWh. A timer and floor sensor stop it running when nobody is using the room.