What does bathroom underfloor heating cost in Clwyd?
Our guide range in Clwyd is £650–£2,300 including VAT. Prices in Clwyd run at about 7% below the UK guide, based on Wales labour rates.
Electric mat
- Insulation board
Electric, larger room
- Electrician sign-off
Wet system
- Pipes linked to the heating
Guide prices for Clwyd including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Clwyd?
Water across much of Clwyd is moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier. We check door thresholds in Wrexham homes at the survey, because underfloor heating and new tiles raise the floor slightly.
What the job includes
- Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
- A floor sensor set between the heating runs and wired back to the thermostat
- A check of the floor construction, the room's heat loss and where the thermostat and supply will go
- The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
- Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
- Bringing the system up to temperature gradually once the adhesive and grout have cured
Decisions to make first
Thermostat
A simple dial thermostat, a programmable one with set times, or a smart thermostat you can control from your phone.
Insulation board thickness
Thicker boards warm up faster and lose less heat downwards, but raise the floor; the right choice depends on the door threshold and the next room.
Floor heating and towel rail
Underfloor heating warms the room; a towel rail dries towels. Many bathrooms have both, and a dual-fuel rail keeps working in summer when the boiler is off.
Electric or wet
Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.
Rules that apply in Wales
Electric underfloor heating in a bathroom must be on a circuit with 30 mA RCD protection under BS 7671, and the thermostat is positioned to suit the bathroom zones. There is no separate approval for the heating itself, but it should have its own thermostat and timer so it only runs when needed, and the electrical work must meet BS 7671 — in England and Wales it is notifiable as bathroom electrical work. Any work on a gas boiler for a wet system must be done by a Gas Safe registered engineer.
In Wales, the Welsh Part P also makes a new underfloor heating circuit notifiable, and it covers more bathroom electrical work than the English version. A registered electrician handles the notification.