Underfloor heating in Wrexham

Postcode districts: LL11, LL12, LL13
Nearby: Brymbo, Rhosllannerchrugog and Buckley
Guide price: £650–£2,300
Typical time on site: 1–2 working days (added to a fit)
Water: Moderately hard across most of Clwyd
Survey: Free, at your home

What does bathroom underfloor heating cost in Wrexham?

Our guide price for bathroom underfloor heating in Wrexham is £650–£2,300 including VAT. We adjust the national guide for Wales, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£650–£1,400

Insulation board

Electric, larger room

£1,100–£2,000

Electrician sign-off

Wet system

£1,400–£2,800

Pipes linked to the heating

Guide prices for Wrexham including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Wrexham

As well as Wrexham itself (LL11, LL12 and LL13), we survey in Brymbo, Rhosllannerchrugog and Buckley.

In a city the size of Wrexham, parking and access for a skip are worth sorting before the start date — we will ask at the survey. Whether your Wrexham bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room. Where a Wrexham home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric.

Most of Clwyd has moderately hard water. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
Bringing the system up to temperature gradually once the adhesive and grout have cured
The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit

Decisions to make first

Thermostat

A simple dial thermostat, a programmable one with set times, or a smart thermostat you can control from your phone.

Floor finish

Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.

Rules that apply in Wales

In Wales, the Welsh Part P also makes a new underfloor heating circuit notifiable, and it covers more bathroom electrical work than the English version. A registered electrician handles the notification.

More about underfloor heating

Underfloor heating in Wrexham: questions

How much does bathroom underfloor heating cost in Wrexham?

Bathroom underfloor heating in Wrexham usually costs £650–£2,300 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Do you cover LL11 in Wrexham?

Yes. We cover all of Wrexham, including LL11, LL12 and LL13, and nearby Brymbo, Rhosllannerchrugog and Buckley. Survey visits are free and arranged at a time that suits you.

Is the water hard in Wrexham?

Who handles building control for bathroom underfloor heating in Wrexham?

Building control for Wrexham is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Is electric underfloor heating expensive to run in a bathroom?

Running cost depends on the heated area, the insulation under the mat, how long it runs and your electricity tariff. As an example, a 150 W per m² mat covering 3 m² draws 450 W, so two hours a day uses about 0.9 kWh. A timer and floor sensor stop it running when nobody is using the room.