Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Clwyd · LL11

Vanity units in Wrexham

Vanity units in Wrexham, planned from measurements taken in your home and priced in writing. We cover LL11, LL12 and LL13 and the surrounding area.

£350–£1,400 inc VAThalf a day to 1 dayFree home survey
Wall-hung vanity unit with a basin, tap and mirror, example for Wrexham
Postcode districts
LL11, LL12, LL13
Nearby
Brymbo, Rhosllannerchrugog and Buckley
Guide price
£350–£1,400
Typical time on site
half a day to 1 day
Water
Moderately hard across most of Clwyd
Survey
Free, at your home

What does a new vanity unit cost in Wrexham?

Guide price in Wrexham: £350–£1,400 including VAT, depending on the room and what you choose. Prices in Wales run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Fit your unit

£140–£350
  • Taps and waste connected

Double or bespoke

£950–£2,300
  • Double basin or long run

Guide prices for Wrexham including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Wrexham

We cover every part of Wrexham, including LL11, LL12 and LL13, and nearby Brymbo (3.4 miles) and Rhosllannerchrugog (3.8 miles).

Wrexham is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. We quote vanity unit work in Wrexham after seeing the wall and pipework, so any re-tiling is on the quote from the start. Landlords in Wrexham can have a worn basin replaced with a vanity unit in half a day to a day.

Water across much of Clwyd is moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Removal of the old basin and pedestal, or old vanity, and taking it away
  • Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
  • Patching or re-tiling the wall where the old basin left gaps
  • A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls

Decisions to make first

Basin type

An inset or semi-recessed basin, a one-piece moulded top, or a countertop basin on a worktop. Countertop basins need a tall tap or a wall-mounted one.

One basin or two

Two basins help a busy household if the wall is long enough. In a smaller room, one basin with a longer top often works better.

Rules that apply in Wales

Wales follows the same water fittings regulations as England. Its own Part P covers more electrical work, so a lit vanity or mirror should be connected by a registered electrician.

More about vanity units

Vanity units in Wrexham: questions

How much should I budget for a new vanity unit in Wrexham?

A new vanity unit in Wrexham usually costs £350–£1,400 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Do you cover LL11 in Wrexham?

Yes. We cover all of Wrexham, including LL11, LL12 and LL13, and nearby Brymbo, Rhosllannerchrugog and Buckley. Survey visits are free and arranged at a time that suits you.

Is the water hard in Wrexham?

Water across much of Clwyd is moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a new vanity unit in Wrexham?

Building control for Wrexham is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can a wall-hung vanity unit go on a stud wall?

Yes, if there are timber noggins or a fixing frame behind the board at the right height. In a new stud wall these go in before boarding; in an existing one, the board is opened, noggins are added and the wall is made good. Plasterboard fixings alone are not enough for a loaded basin unit.

Vanity units in Wrexham

Book a free home survey in Wrexham. You get a measured layout and an itemised written price before anything is ordered.